Hook up sub to stock radio, adding subwoofer to stock car radio

Quick Links

Gather your equipment Amp, Subs, Stereo, and wiring. Will the wires still match up on the aftermarket radio I purchased? Brought to you by Techwalla. If all connections seem correct but the speaker is not functioning properly, for consult an expert at your local electronics store.

Secure all of the amp's connections tightly using a screwdriver. Most amps have high level inputs but most of the time I prefer to use a line out converter. Go to Radio Shack or Best Buy and get a wiring harness that plugs directly into the car harness. Where can you find a cheap radio that supports subs? Can you hook up two subwoofers to one receiver?

  1. Electrical tape at the entry point will give the wire added protection.
  2. Run the power wire to your amp.
  3. Get your capacitor as close to the amp as possible, and use the same ground as you did for the amp.
  4. Now that your amp is tapped into your car's factory audio system, run speaker wires from the amp's speaker outputs to the speaker s or sub-woofer s you want the amp to power.
  5. Where do you hook up a second bass speaker to my sony surround sound?

How to Wire an Amp to a Sub and Head Unit 12 Steps

  • This could be caused by a bad ground.
  • Did I need to put fuse between the first and second battery?
  • Can you hook a ipod up to a car radio?

Yahoo Answers

How do you connect subwoofers without all the wires? The fuse amperage should match the gauge size. Items you will need Amplifier with speaker-level inputs Amp installation kit gauge speaker wire Electrical tape Wire stripper Socket set or adjustable wrench Screwdriver. Can I still add the sub to the stock radio? All you need to do is get a rca wire, cut in half, strip both the outer and inner wire.

How do i hook up my subwoofer to a stock radio

It Still Works

Touch the wires that were connected to the stock radio to a hot wire and see if the antenna starts to move. To submit your questions or ideas, or to simply learn more about It Still Works, contact us. If you installed a powered sub, you will not need to connect the amplifier and speaker, as they are already connected. Where can you find radio wiring diagram for a Chevy Impala ls?

How to Wire an Amp & Subwoofers Into a Stock Stereo

How do I connect my new sub to my old amp? Cookies make wikiHow better. Hide all of the cables and wires behind carpeting, panels or trim for a cleaner and more professional look.

And if so, would you have to run wires from the door speakers to the sub location, dating and then another set of wires back to the doors to the speakers? Buy a new radio and install it. My amp is already installed and I just bought a new sub.

Adding subwoofer to stock car radio Polk Audio

How do i hook up my subwoofer to a stock radio

Hey, I have a chevy silverado with the bose radio. How do you get the antenna to go up with a new stereo installed if the antenna wire is connected to the stereo but the antenna won't raise now even from the switch? The remote antenna power wire is responsible for the antenna coming out of a car with a retractable antenna.

Report Abuse

Every amp has pre-drilled mounting screw holes located on each of the four corners of the amp for easier mounting. Subs and amps should be matched as closely as possible for best performance and longevity. Mount the antenna to the truck and run the coax to the radio following a path that does not cause interference with other functions like seat adjustment or the pedals. Things You'll Need Stereo.

That's why we went with the standard system. Last thing you need is a dead battery. Mounting brackets and speaker enclosures can be purchased at any local car audio retailer. Music is like candy, you have to get rid of the rappers to enjoy it.

Connect your amplifier to your speaker by running the positive and negative speaker wires to the proper terminals on your speaker. Can you put a sound system into a stock radio? Hook up Subwoofers to Chevy Cobalt? Just match the positive and negatives.

Wiring Subwoofers to stock Radio

You took your stock radio out of your jeep and you cant figure the wiring to hook up a after market radio you need a diagram if possible? Adding a subwoofer and amplifier to your existing stereo is a great way to improve the bottom-end output of your system and is one of the most common upgrades performed on a car's audio gear. You can buy an adapter that hooks up to the speaker outputs and generates a true turn on lead or you can hook it up to ignition pink at the key switch if you want to save money.

Do you know if the stock speaker have connection for a Sub? Stock car stereo systems usually do not pack much punch. How do you unlock Malibu radio?

They are connected in series. Some aftermarket stereos have a place to hook this wire up and some don't. Where do you hook a ground wire up for a car radio? To hook up a radio in a chevy impala do i need the charm or can it be direct wired. Connect your amplifier or powered sub to your car's stock head unit.

All you need is an adaptor. Subwoofers can be large speakers that are usually housed in speaker enclosures installed in the trunk of the car. Already answered Not a question Bad question Other. If the amp doesn't seem to be working properly, disconnect your battery again and go back and double-check all of your wiring for possible damaged wire, eastern european grounded wire or loose connections. Contact Account Shopping Cart.

You can usually find one on the sidewall behind the carpeting. Run yourself a good wire for ground directly to the chassis. The best location for the amp is usually the trunk. Make sure that you use cables with the correct resistance or impedance for your setup.

Where do I hook up the orange wire when installing an aftermarket radio in a dodge Dakota? Can you hook up amp and woofers to a Buick stock radio? How do you hook up subwoofers in a car?

You want to ground your cap. Include your email address to get a message when this question is answered. Good luck it will make a huge improvment.

Adding subwoofer to stock car radio

Don't forget to test your rem wire before you assume it works. You want an amp more powerful than your sub, because you don't want your sub to clip. The wires are not grounded properly, check to make sure the surface is clean, who unpainted metal.

Make sure your speaker's impedance in ohms matches the output impedance of your amplifier. Factory radio wiring diagram for a Mazda truck? The sub cuts on and off at high volume when I use the auxiliary cord to phone. Then run the remote wire back to the amp and cut it there leaving a foot or so of extra cable.

How to Add an Amplifier to a Factory Stereo
  • Hot christian dating
  • Top ten dating site in europe
  • Useful tips dating your best friend
  • Korean matchmaking service los angeles
  • Real dating sites
  • Create dating profile